Motorcycle and ATV Tire Repair Kit
This assortment of patches and plugs provides you with the tools & materials needed to repair and re-inflate your tire on the spot. Once again, dismounting tools are necessary to repair or replace your tube. But the enclosed Rasp and Split-Eye Tool allows you to plug your tubeless tire on the wheel. No bending or twisting is necessary. You simply push the plug straight into the puncture and pull the tool straight out. A twist of the Rasp tool inserted in the needle eye releases the plug.
A valve cap/core remover and replacement core is included to insure that the re-inflation process goes well. Even a towel with waterless hand cleaner is included in this vinyl zippered pouch measuring 5" x 7 1/2" x 1" and weighing only 1 lb. This kit also features (4) CO2 canisters and adapter as shown in the Automatic Tire Inflation Kit.
Product Contents
• (5) 4 1/2" "On the Wheel" Rubber Insertion Strips
• (3) 1 1/4" Round Vulcanizing Patches
• Thumb Buffer
• Split-Eye Needle Insertion Tool
• Reamer/Rasp Tool
• Valve Cap with Core Remover
• Replacement Valve Core
• Tube of Rubber Cement 1/2" fluid oz.
• (4) Steel Canisters containing 16 grams of 100% pure high-velocity CO2 gas
• Tire Valve Adapter with brass fittings
• Waterless Hand Cleaner & Towel
• Full Instructions
• Compact Vinyl Zippered Pouch (5" x 8" x 1")
Stop & Go Pocket Tire Plugger
Why be stranded? This kit gives you the ability to perform the most effective repair possible without dismounting your tubeless tire. And if you operate a Motorcycle, ATV, Golf Car, Small Tractor, Utility Vehicle, or Wheelbarrow you're going to be back in action in just a few minutes.
With the addition of (4) 16 gram canisters of 100% pure high velocity CO2 gas and the 4" fully flexible Adapter with solid brass fittings this kit becomes everything needed to repair and re-inflate your tire. For further details regarding these added items please see #1090 Automatic Tire Inflation Kit. This kit measures 5" x & 7 1/2" x 1" and weighs only 18 ounces.
Package Contents
• Nozzle
• Tire Plugging Device
• (4) Steel Canisters containing 16 grams each of 100% pure high-velocity CO2 gas
• Probe Tool
• Reamer/Rasp Tool
• Hex Wrench
• (15) Mushroom Plugs (5/16" diameter shaft x 3/4" length stem)
• Retractable Razor Knife
• Extra Zip Lock Bag
• Tire Valve Adapter with brass fittings
• Instructions for use of CO2 inflation system
• Vinyl Zippered Pouch (8" x 5" x 1")
Stop & Go Tubeless Tire Repair Kit!
Unlike other needle type tools that have the release opening on the side, this tool has the split right in the center. You simply push the tool directly into the puncture and pull straight out. No bending, twisting, or looping is necessary. A twist of the Rasp tool inserted into the needle eye releases the plug. It's a tried and true method. You can Stop & Go too.
This kit is for general use on all tubeless tires. Five re-enforced rubber Insert Strips, Rasp tool, Split-eye Insertion tool, and a .41 fl. oz. tube of Rubber Cement are all included in this inexpensive yet very effective kit.
Extra CO2 Canisters (3)
Extra CO2 canisters for Stop & Go Pocket Tire Plugger and Motorcycle and ATV Tire Repair Kit
|
